Skylark L4-138 2.3L SOHC VIN 3 MFI QUAD 4 (1992)
Map Light: Technical Service Bulletins
Lights - Front Map Lamp Button Binding or Sticking
Bulletin: 92-8-32
Date: Oct. '92
Ref.No.: 92-288-8
Corp.Ref.No.: 231041R
SUBJECT:
FRONT MAP LAMP BUTTON BINDING OR STICKING (REPLACE MAP LAMP)
MODELS AFFECTED:
1992 SKYLARK
CONDITION:
Some owners of 1992 Skylarks may experience the front map lamp buttons binding or sticking upon actuation. The cars were built before VIN
breakpoint 1G4NJ54N1NC634523
CAUSE:
Inadequate clearance between the rear map lamp bezel snap legs and the button. When the map lamp is assembled into the storage box, the snap legs
bind against the button preventing proper travel needed for the button.
CORRECTION:
Remove the front map lamp and replace it following the 1992 Skylark Service Manual. The service part numbers containing the design change are:
Color and Side
Service Part Number
MED SLATE GRAY (15I) RH
12521040
MED SLATE GRAY (15I) LH
12521041
GRAPHITE (78I) RH
12521042
GRAPHITE (78I) LH
12521043
MED CAMEL (76I) RH
12521044
MED CAMEL (76I) LH
12521045
GARNET (781) RH
12521046
GARNET (78I) LH
12521047
Important:
Vehicles built after 2/17/92 contain the correct front map lamps per product action authorization number 32I1080.
Parts are currently available from GMSPO.
Refer to the Labor Time Guide for appropriate Labor Operations and Times.
