Skylark L4-138 2.3L SOHC VIN 3 MFI QUAD 4 (1992)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1.
Remove sensor harness connector at sensor.
2.
Remove sensor to block bolt (1).
3.
Remove sensor from engine.
4.
Inspect sensor O-ring for wear, cracks or leakage. Replace if necessary. Lube new O-ring with engine oil before installing.
INSTALLATION
1.
Install sensor into hole in block.
2.
Install sensor to block bolt (1). Torque to 10 N-m (88 lb.in.).
3.
Install sensor harness connector.
