Skylark L4-138 2.3L SOHC VIN 3 MFI QUAD 4 (1992)
Arm Rest: All Technical Service Bulletins
Door Armrest - Front Side Molding Not Fully Seated
Bulletin: 93-10-8
Date: Nov. '92
Ref.No.: 93-32-10
Corp.Ref.No.: 231056
SUBJECT:
FRONT SIDE DOOR ARMREST MOLDING RETENTION (APPLY ADHESIVE)
MODELS AFFECTED:
1992-93 SKYLARK MODELS
CONDITION:
Some owners of 1992-93 Skylarks may comment that the front side door armrest molding does not stay fully seated in the door trim panel.
CAUSE:
Front side door armrest molding barbs have been damaged and no longer retain the molding.
CORRECTION:
1.
Pull the molding away from the upper trim panel in the affected area.
2.
Apply a drop of adhesive, P/N 12345632, or equivalent on the top side of the molding barbs and reinsert the barbs into the slots.
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
Labor Operation Number:
T1891
Labor Time:
0.2 Hour (Both sides)
