buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Recall - Incorrect Upper Rear Spring Seat Installed|Page 5700 > < Recall - Incorrect Upper Rear Spring Seat Installed|Page 5698
Page 1
background image

Coil Spring Seat: Recalls
Service Procedure and Parts Information

PARTS INFORMATION

Parts required to complete this campaign will be shipped directly to only those dealers with a vehicle(s) involved in this campaign along with the
campaign DCS being provided to the dealer. Parts are being shipped at no charge to the dealer.

SERVICE PROCEDURE:

1.

Position car on frame type hoist. See service manual section OA. Remove right rear tire and wheel assembly.

Fuel Filler Cap Pocket Assembly

2.

Open the fuel fill door and remove four (4) 7 mm screws from the fuel filler pocket. With fuel filler cap still on, partially push the fuel filler neck
inward. See figure 1.

3.

Raise vehicle on hoist. See service manual section OA.

4.

Remove one 13 mm bolt from the clip which holds the fuel filler pipe to the body frame rail. See figure 2.

Recall - Incorrect Upper Rear Spring Seat Installed|Page 5700 > < Recall - Incorrect Upper Rear Spring Seat Installed|Page 5698