Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Drive Belt: Service and Repair
TOOL REQUIRED
^
J 37059 Accessory Drive Belt Tensioner Wrench
WARNING: To avoid personal injury when rotating the accessory drive belt tensioner, use a tight fitting 13 mm wrench that is at least 46 cm (18 inch)
long.
REMOVAL
Use Accessory Drive Belt Tensioner Wrench in order to remove the accessory drive belt by rotating the tensioner.
INSTALLATION
Use Accessory Drive Belt Tensioner Wrench in order to install the accessory drive belt by rotating the tensioner.
