Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Fluid Pan: Service and Repair
REMOVE OR DISCONNECT
1. Raise vehicle and suitably support.
2. Loosen pan bolts and drain oil.
3. Pan attaching bolts.
4. Pan and gasket.
INSTALL OR CONNECT
1. Pan and gasket. Oil pan gasket may be re-used, unless sealing ribs are damaged. If damaged, use new gasket.
2. Pan attaching bolts.
Tighten
^
Pan bolts to 14 Nm (124 inch lbs.).
3. Lower vehicle.
4. Refill transaxle to proper level with DEXRON(R) III oil.
Inspect
^
Oil pan gasket for leaks.
