Skylark L4-144 2.4L DOHC VIN T SFI (1997)
Wiper Blade: Service and Repair
Wiper Blade Element Replacement
Wiper Blade Assembly And Element Replacement
Important
^
Wiper blade element must be replaced if removed from blade assembly.
Remove or Disconnect
1. Wiper blade assembly (11).
2. Compress notched end of blade element (10) vertebra with pliers, then pull outward to disengage vertebra from outer claw set of blade
superstructure (9).
3. Blade element from superstructure.
Install or Connect
1. New blade element (10) into superstructure (9) until outer claw set engages notched end of blade element vertebra.
Important
^
Be sure blade element is secure in all claw sets of superstructure.
2. Wiper blade assembly (11).
