buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Connecting Rods, Push Rods, Bell Cranks|Page 6104 > < Connecting Rods, Push Rods, Bell Cranks|Page 6102
Page 1
background image

Window Regulator: Service and Repair
Striker

Interlock Assembly

CAUTION: The striker and plate make the door interlock with the roof rail in a crash. If someone were to remove them. the door
couldn't interlock with the roof rail in a crash and might spring open. People inside could be thrown out of the car much more easily with
the door open. Be sure you never remove the striker or the plate when you're doing repair work around them.

Remove or Disconnect

1. Scribe location of striker onto vehicle body.
2. Two screws (1) and striker (3).
3. Clean adhesive from mounting location.

Install or Connect

1. Peel protective paper (2) from back of striker (3).
2. Striker (3) with two screws (1).
3. Close door slowly and check for proper alignment.

Tighten
^

Screws (1) to 7 N.m (62 lbs. in.).

Connecting Rods, Push Rods, Bell Cranks|Page 6104 > < Connecting Rods, Push Rods, Bell Cranks|Page 6102