Skylark L4-151 2.5L (1991)
4.
Check measurement between mirror patch inboard and outboard sides of run channel, Figure 1 View A. If opening is less than 22 mm (7/8 inch),
open mirror patch area to 22 mm (7/8 inch) by grinding.
5.
Grind ends of window run channel 1.6 mm (1/16 inch) deep as shown in Figure 1 Sections "C-C" and "D-D" and remove a length 90 mm at the
front and 195 mm at the rear of the run channel as shown in Figure 1 View A and View B.
