Skylark L4-151 2.5L VIN R TBI (1982)
Fig. 17 Power steering pump removal & installation. 1982 V6-262 Diesel
V6-262 DIESEL
1982
1.
Remove drive belt, then drain power steering fluid from power steering pump reservoir.
2.
Raise and support vehicle and disconnect pressure and return lines from power steering pump.
3.
Working through access holes in pump pulley, remove three bolts from front of pump.
4.
Remove two nuts holding lower brace to engine and remove bracket.
5.
Remove pump and pulley assembly from vehicle.
6.
Reverse procedure to install, Fig. 17.