Skylark L4-151 2.5L VIN R TBI (1982)
To correct the condition remove the vacuum pump and install cover, Part Number 10022599, and gasket, Part Number 9776705, using the existing bolts
and washers. A vacuum tank, Part Number 14080255, must be installed using nuts, Part Number 11503747. The vacuum tank is installed below the
vapor canister as shown in Figure 2. Six feet of 1/4" vacuum hose, one foot of
1/8"
vacuum hose and 1/4" - 1/8" reducer are required to connect the
canister. The canister should be connected as shown in Figure 1. Verify operation of cruise control unit.