Skylark V6-173 2.8L VIN W FI (1985)
Technical Service Bulletin # 8523
Date: 850201
Wheels - Locking Wire Wheel Covers
Bulletin
85-2-3
Date
Feb. '85
Ref. No.
85-074-2
SUBJECT:
LOCKING WIRE WHEEL COVERS
MODELS AFFECTED: 1985
The custom locking wire wheel cover package (Option N91) is shipped in the trunk compartment. This package contains the locking wire wheel covers,
medallions, lock key wrench and I.D./Registration Card, lock brackets, lock bolts/nuts and anti-rotation clips on Electras. At the time of delivery of a
new vehicle by the carrier, the contents of the package containing Option N91 are to be inspected for missing or incorrect parts. The special wheel lug
nuts (3 per wheel) to hold the lock bracket on the wheel are factory installed on the wheels. Any discrepancies are to be noted on the delivery receipt and
a transportation claim is to be filed for any missing or incorrect parts.
Replacement of Missing, Incorrect or Lost Parts
Lock key wrenches and/or I.D./Registration Cards are available from NI Industries.
A.
Lock key wrench missing upon delivery of vehicle from factory or lost after deliver:
Send I.D./Registration Card, along with a check in the amount of $7.50 made payable to NI Industries.
B.
I.D./Registration Card missing:
Provide NI Industries with the lock bolt/nut color. A new color coordinated I.D./Registration Card will be forwarded to the dealership. A
secondary identification method on the Electra, is the color coded lock key wrench cap; and a two letter color code on the lock key wrench (BK =
black, etc.). Other series use a single code letter on the lock key wrench and color code on the lock bolt.
C.
Lock key wrench does not fit lock bolt/nut. Send lock key wrench and I.D./Registration Card to NI Industries with a letter indicating the color of
the lock bolt/nut in the center of the locking wire wheel cover. The proper lock key wrench and I.D./Registration Card will be returned to the
dealership.
D.
I.D./Registration Card and "T" shaped lock key wrench both missing.
Provide the color of the lock bolt/nut in the center of the wire wheel cover, along with a check in the amount of $7.50 made payable to NI
Industries.
Part Ordering
All requests
for lock key wrenches and I.D./Registration Cards must be made
on dealership stationary to:
NI Industries, Inc. Automotive Trim Division 39600 Orchard Hill Place Novi, Mi 48050