Skylark V6-173 2.8L VIN W FI (1985)
Fluid Pan: All Technical Service Bulletins
A/T - Possible Reuse Hex Head Screws & Conical Washers
Bulletin:
85-7-4
Date:
Feb 1985
Ref. No.: 85-128-7
SUBJECT:
USAGE OF HEX HEAD SCREW AND CONICAL WASHER ASSEMBLIES
MODELS AFFECTED:
ALL THM TRANSMISSIONS OR TRANSAXLES
HEX HEAD SCREW AND CONICAL WASHER ASSEMBLY
When servicing any THM transmission or transaxle and removal of the side cover and/or bottom pan is required, IT IS NOT ALWAYS NECESSARY
TO REPLACE THE HEX HEAD SCREWS AND CONICAL WASHER ASSEMBLIES.
Only screws with the coating stripped away exposing exterior portion of the head or washer or those screws with the washer inverted should be replaced.
(See illustration below).
Insert this information in the appropriate section of your 1985 service manual..
