Skylark V6-173 2.8L VIN X 2-bbl (1984)
Figure 3 - Checking Mixture Control solenoid Plunger Travel
1.
PLACE J-34935-1 OR BT-8420A IN "D" SHAPED VENT HOLE. ALLOW GAGE TO TOUCH SOLENOID PLUNGER.
2.
OBSERVE MARK ON GAGE THAT LINES UP WITH CASTING.
3.
PUSH GAGE DOWN UNTIL PLUNGER IS IN "DOWN" POSITION, AND OBSERVE DIFFERENCE IN GAGE READINGS. THE
SOLENOID PLUNGER TRAVEL SHOULD BE BETWEEN 2/32" AND 6/32".
