Skylark V6-173 2.8L VIN X 2-bbl (1984)
Wheel Cover: Technical Service Bulletins
Locking Wire Wheel Covers - Information
Bulletin
84-3-1
Date
Jan. '84
Ref.No.
84-081-3
SUBJECT:
Locking Wire Wheel Covers
MODELS AFFECTED: 1984
The custom locking wire wheel cover package (Option N91) is shipped in the trunk compartment. This package contains the locking wire wheel covers,
medallions, lock key wrench and I.D./Registration Card. The lock brackets and lock bolts are also in this package for the Century and Riviera. The
remaining models have the lock bolts and brackets installed by the assembly plant. At the time of delivery of a new vehicle by the carrier, the contents of
the package containing Option N91 are to be inspected for missing or incorrect parts.
In addition, the trunk compartment is to be inspected for the plastic bag containing the special lug nuts. Any discrepancies are to be noted on the delivery
receipt and a transportation claim is to be filed for any missing or incorrect parts.
REPLACEMENT OF MISSING, INCORRECT, OR LOST PARTS
Lock key wrenches and/or I.D./Registration Cards are available from Norris Industries.
A.
Lock key wrench missing upon delivery of vehicle from factory or lost at dealership after delivery:
Send I.D./Registration Card, along with a check in the amount of $7.50 for the replacement lock key wrench to Norris Industries.
B.
I.D./Registration Card missing:
Provide the applicable company with the color of the stripe on the lock key wrench. A new color coordinated I.D./Registration Card will be
forwarded to the dealership.
C.
Lock key wrench does not fit lock bolt:
Send lock key wrench and I.D./Registration card to Norris Industries with a letter indicating the color of the lock bolt in the center of the
locking wire wheel cover. The proper lock key wrench and I.D./Registration Card will be returned to the dealership.
D.. I.D./Registration Card and lock key wrench both missing:
Provide the color of the lock bolt in the center of the wire wheel cover, along with a check in the amount of $7.50 made payable to the Norris
Industries. The proper lock key wrench and I.D./Registration Card will be forwarded to your dealership.
Locking wire wheel covers require an "L" shaped lock key wrench. Their wrench will have an alpha letter stamped on its cylinder portion to match
the lock bolt letter.
PARTS ORDERING
All requests for lock key wrenches and I.D. registration cards must be made on dealership stationary to:
Norris Industries, Inc.
Automotive Trim Division
All Models
39600 Orchard Hill Place Novi, MI 48050
