Skylark V6-173 2.8L VIN Z 2-bbl HP (1982)
FIGURE 7B-32A
Place the (3) R.H. bearing races onto their respective bearings. See Figure 7B-32A.
3.
Position (3) gauges; J-26935-2 on input bearing and J-26935-4 onto output bearing and J-26935-3 on the differential bearing. Be sure the
bearing races fit smoothly into the bores of the gauge tools.
4.
On J-26935-4 (output shaft), install metal oil shield retainer into bore on top of tool.
FIGURE 7B-33A
