Skylark V6-181 3.0L (1986)
SHADED AREA = ANTI-CHIP MATERIAL TWO DOOR SHOWN, FOUR DOORSIMILAR
SERVICE PROCEDURE
1.
Remove the basecoat/clearcoat from areas, as shown in illustrations. In some cases, the basecoat/clearcoat can be effectively removed by using an
air hose to blow it away from the chip resistant material.
NOTE:
Every effort should be made to leave as much of the chip resistant material as possible. Therefore, removal of the basecoat/clearcoat by
sanding should be done very carefully, using 400 paper and finishing with 600 paper.
2.
Refinish areas by using recommended basecoat/clearcoat application procedures specified for the materials being used.
The following materials or their equivalent are recommended:
Centari Basecoats Centari Basemaker - 82805 Centari 780S Clearcoat Centari 782S Catalyst
Lacquer materials may also be used for this repair where local conditions require it.