Skylark V6-181 3.0L (1986)
4.
With a putty knife or equivalent, carefully release molding from around quarter window reveal molding and/or frame at clip locations (see View
A).
5.
Using a putty knife with a sharpened edge and a hammer, carefully cut the urethane bond, between quarter window reveal molding and/or frame to
quarter glass (see View B).
Installation
1.
Clean urethane from glass and quarter window reveal molding or frame.
2.
Prime quarter window glass molding and/or frame with black primer in urethane adhesive kit number 9636067 or equivalent. Allow primer to dry
(5 minutes).
3.
Apply 3/16" bead of urethane as shown in View C.
4.
Remove tape from around quarter window opening.
5.
Install quarter window reveal molding and/or frame to body.
6.
Install molding and insert.
7.
Tape quarter window reveal molding and/or frame to body until urethane cures (6 hours).
8.
Clean body and glass.
