Skylark V6-191 3.1L VIN M SFI (1994)
2. Seat belt opening escutcheon (13).
3. Pull handle.
4. Screw (3).
5. Reflector (5) using a thin bladed screw driver to disengage clips (6) from trim panel (1).
6. Screw (4).
7. Screws (7).
8. Window regulator handle, if equipped.
9. Inside door handle escutcheon.
10. Pull outboard on trim panel (1), disengaging studs (8) from retainers (9).
11. Seat belt through slit in bottom of trim panel.
12. Lift up on bottom of trim panel (1) to disengage hooks (10) from slots (11).
13. Any electrical connectors to switches on trim panel.
14. Trim panel (1) from vehicle.
Install or Connect
1. Any electrical connectors to switches on trim panel (1).
2. Hooks (10) into slots (11) and push down on trim panel to engage.
3. Seat belt through slits in top and bottom of trim panel.
4. Align studs (8) to retainers (9) and apply pressure on trim panel to engage.
5. Screws (7).
6. Screws (4).
7. Reflector (5) by aligning clips (6) to slots in trim panel (1) and apply pressure to secure in place.
8. Screw (3).
9. Inside pull handle.
10. Window regulator handle, if equipped.
11. Seat belt opening escutcheon.
12. Outside mirror escutcheon.
13. Inside door handle escutcheon.
