Skylark V6-191 3.1L VIN M SFI (1994)
Brake Warning Indicator: Initial Inspection and Diagnostic Overview
Troubleshooting Hints
PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. Check GAGES Fuse by observing Malfunction Indicator Lamp with Ignition Switch in "RUN" and engine OFF.
2. If BRAKE Indicator does not light for a particular condition, check suspect switch for battery voltage at CKT 33 (TAN/WHT) terminal and a
good ground circuit. If wires are good to suspect switch, replace suspect switch.
^
Refer to Starting and Charging for Ignition Switch access information.
^
Refer to System Diagnosis. See: System Diagnosis