Skylark V6-191 3.1L VIN M SFI (1994)
Refrigerant Pressure Sensor / Switch: Description and Operation
A/C PRESSURE SENSOR
An electronic A/C pressure sensor is mounted in the line (between the compressor and the condenser). Its output to the PCM is variable and is
dependent upon pressure inside the line. A higher pressure results in a higher voltage output. The PCM constantly monitors A/C system pressure to:
1. Disengage the A/C clutch if the pressures are too high.
2. Disengage the A/C clutch if pressures are too low.
3. Boost idle air control to compensate for A/C load at idle.
4. Control cooling fan operation.
The pressure sensor is not repairable, if it fails, it must be replaced.