Skylark V6-191 3.1L VIN M SFI (1994)
Steering Gear: Service and Repair
Rod/Rack and Cylinder Tube Assembly
Fig. 24 Exploded View Of Power Rack & Pinion Assembly
1. Remove dust cover from housing, Fig. 24.
2. While holding stub shaft, remove locknut from pinion.
3. With gear centered, mark location of stub shaft notch on housing to aid in proper installation of the pinion and valve assembly.
4. Using a suitable press, press on threaded end of pinion until it is possible to remove the pinion and valve assembly from the housing.
