Skylark V6-191 3.1L VIN M SFI (1994)
CAUSE:
(Figure 2) This condition may be due to an off center bore in the Fourth Clutch Hub and Shaft Assembly that houses the Fourth Clutch Bearing
Assembly. The off center bore may cause the transaxle to vibrate in second gear at high engine speeds.
CORRECTION:
(Figure 2) A new Fourth Clutch Hub and Shaft Assembly has been released. The new Fourth Clutch Hub and Shaft Assembly can be identified by a
purple (ink) stripe around its shaft.
SERVICE PARTS INFORMATION:
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
For vehicles repaired under warranty, use:
Labor Operation:
K7528
Labor Time:
Use the published labor operation time.
