Skylark V6-3100 3.1L VIN M SFI (1996)
Electronic Brake Control Module: Service and Repair
Fig. 800 EBCM Assembly Removal.
1. Disconnect EBCM electrical connectors, Fig.800.
2. Remove ECU to dash panel attaching screws, then the ECU from dash panel.
3. Reverse procedure to install, noting the following:
a. Ensure plastic grommets, if equipped, are located properly.
b. Bleed brake system as described under Brake System Bleed. See: Brakes and Traction Control/Brake Bleeding
