Skylark V6-3100 3.1L VIN M SFI (1996)
Power Mirror Switch: Technical Service Bulletins
Mirror Switch Bezel - R&R Procedure Addition
File In Section: 10 - Body
Bulletin No: 53-10-24
Date: October, 1995
SERVICE MANUAL UPDATE
Subject:
Section 10-6 - Add Remove/Install Procedure for Mirror Switch Bezel
Models:
1996 Buick Skylark
1996 Oldsmobile Achieva
1996 Pontiac Grand Am
Please add the following procedure to Section 10-6 of the Service Manual.
Mirror Switch Bezel
Remove or Disconnect
1.
Front door power lock and window switch bezel by prying at top of bezel.
2.
Wire harness connectors.
3.
At front door power lock and window switch opening, reach inside opening of door trim panel and disengage mirror switch from bezel by pulling
on base of mirror switch.
4.
Push on base of bezel to disconnect from door trim panel.
Install or Connect
1.
Align keyway on bezel to door trim panel and push to engage bezel.
2.
At front door power lock and window switch opening, reach inside opening of door trim panel and align keyway on mirror switch to bezel, then
grasp mirror switch handle and pull toward bezel until it snaps in place.
3.
Wire harness connectors.
4.
Front door power lock and window switch bezel by inserting clips and snap into place.
