Somerset V6-181 3.0L (1986)
Power Steering Pump: Service and Repair
Power Steering Pump Replace
1.
Remove air cleaner assembly.
2.
Disconnect reservoir to pump hose and pressure line from pump.
3.
Remove clip attaching pressure line to pump.
4.
Loosen pump pivot and adjusting bolts, then remove pump drive belt.
5.
Remove three pump to bracket attaching bolts.On some models, the pump may be attached to bracket by special bolts. To remove these
special bolts, use tool No. T-45 or equivalent.
6.
Remove pump from mounting bracket.
7.
Reverse procedure to install.
