Somerset V6-181 3.0L (1986)
3.
Spray wheel with Amchem #1001, let soak for 1 to 3 minutes; then rinse with water and blow dry.
4.
Finish with Ditzler Delclear Acrylic Urethane and Ditzler Ultra Urethane Additive (three coats).
1st coat
-
Light mist coat, let flash
2nd coat
-
Light, let flash
3rd coat
-
Heavy double wet coat
5.
Let dry for 24 hours -- or, flash for 30 minutes. Force dry at 140~ for 30 minutes, and allow to cool for 30 minutes before mounting.
WHEEL INSTALLATION
1.
Rebalance tire/wheel assemblies by replacing the original balance weights with nylon coated weights.
2.
Install tire/wheel assembly onto car.
REQUIRED MATERIALS
1.
Amchem Alumi Prep #33 - Stock #DX533 (or equivalent) - Cleaning and conditioning chemical for aluminum.
2.
Amchem Alodine #1001 - Stock #DX501 - Coating chemical for aluminum.
3.
Ditzler Delclear Acrylic Urethane Clear - Stock #DAU-75.
4.
Ditzler Delthane Ultra-Urethane Additive - Stock #DXR-80.
(All above available from PPG Industries, Inc./Ditzler Jobbers.)
5.
Nylon coated Weights - These are available from GMWDD in 1/4 ounce increments ranging from 1/4 ounce to 3 ounces, Part Number 9591358
through 9591367, inclusively.
WARRANTY INFORMATION
LABOR OPERATION NUMBER:
T1170
LABOR TIME:
1.7 hours
ADD:
Each additional wheel 1.5 hours
TROUBLE CODE:
92
MATERIAL ALLOWANCE:
$3.75 per wheel
"We believe this source and their products to be reliable. There may be additional manufacturers of such products. General Motors does not endorse,
indicate any preference for, or assume any responsibility for the products or equipment from these firms or for any such items which may be available
from other sources."