Somerset V6-181 3.0L (1986)
FIGURE 2
When servicing this condition on a THM 125C transaxle built between the serial numbers listed below, remove the spacer plate and measure the
diameter of the 1-2 accumulator feedback orifice (Refer to Figure 2 for location). If the hole is 1.02 mm (0.040"), replace the spacer plate with the
indicated service spacer plate, which has a larger (3.18 mm/0.125") 1-2 accumulator feedback orifice.
SERIAL NUMBER
SERIAL NUMBER
SPACER PLATE
MODEL
START
END
PART NUMBER
BAC
4482
6468
8660575
BDC
2137
2289
8660575
BPC
52519
57074
8660575
CAC
8054
8280
8660581
CBC
127346
128483
8660581
CCC
1914
2059
8660581
CMC
1283
11286
8660581
PHC
10949
12483
8660552
PKC
13015
14585
8660552
PRC
35775
39656
8660552
PNC
147386
162750
8660552
Refer to the appropriate service manual for removal and installation procedures.