buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

All Technical Service Bulletins for Throttle Cable/Linkage: > < Recalls for Throttle Cable/Linkage:|85C16|Page 2116
Page 3
background image

Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign
Identification Label." Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or ballpoint pen.

Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.

Apply "Campaign Identification Label" only on a clean dry surface.
DISPOSITION OF PARTS

Replaced parts must be held for disposition by Buick contact personnel. Parts must have a claim tag attached showing the repair order and the VIN of the
vehicle from which they were removed.

WARRANTY INFORMATION

Dealers are to submit each campaigned vehicle as a separate case on the one-line Warranty Document Form S-764. Dealers submitting warranty claims
by terminal are to transmit campaign completions as a separate case also.

LABOR AND PARTS CREDIT

SUBLET
PART

FAILED

PARTS

FAILURE

LABOR

LABOR

OTHER     DEALER

OPER. COUNTPART NO.

ALLOW

CODE

OP. NO.

HOURS

HOURS

MTL. TWG.

Replace   

1

14105794

*

96

V3190

.2

**

-

Throttle Return Spring

*

List current dealer price, plus 30% of installed part.

**

.1 hour for administration.

Dear Buick Owner:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

General motors has determined that a defect which relates to motor vehicle safety exists on some 1985 Somerset Regals equipped with 2.5L engines.

The throttle return spring assembly may fail. If this occurs, it could prevent the throttle from returning to the closed (idle) position when the accelerator
pedal is released. In this event, engine speed may not decrease to a level anticipated by the operator. Although the vehicle can still be stopped with the
service brake, loss of accelerator control could result in a vehicle crash without prior warning.

To prevent this from occurring on your vehicle, please contact your Buick dealer to arrange a service date. The dealer will replace the throttle return
spring. This service will be completed for you at no charge.

Instructions have been sent to your Buick dealer. Thelabor time, to do the work will be about 20 minutes. Please ask your dealer if you wish to know
how much additional time will be necessary to process your vehicle.

Your Buick dealer is best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. However, if you take
your vehicle to your dealer on the agree service date, and he does not remedy this condition on that date, or within five days, we recommend you contact
the Customer Assistance Department, Flint Home Office by calling 800-521-7300.

After contacting your dealer and the Buick Home Office, if you are still not satisfied that we have done our best to remedy this condition without charge
and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 400 Seventh St., S.W.,
Washington, D.C. 20590, or call 800-424-9393 (Washington, D.C. residents use 426-0123).

The enclosed owner reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary correction in the
shortest possible time. If you have sold or traded your vehicle, please let us know by completing the postage paid owner reply card and returning it to us.

We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your safety and continued satisfaction with our
products.

All Technical Service Bulletins for Throttle Cable/Linkage: > < Recalls for Throttle Cable/Linkage:|85C16|Page 2116