Terraza AWD V6-3.5L VIN L (2006)
Sliding Door Handle: Service and Repair
Sliding Door Outside Handle Replacement
Door Handle Replacement - Outside Sliding
Removal Procedure
Important: By removing the power sliding door (PSD) 15A fuse, the low current logic power for both the LH and RH power sliding door
modules (PSDM) will be interrupted and both PSDs will be inoperative.
1. If equipped with a power sliding door, disable the PSD system by removing the PSD 15A fuse from the instrument panel (I/P) fuse block.
2. Remove the sliding door inner trim panel. Refer to Trim Panel Replacement - Side Rear Door () .
3. Remove the sliding door water deflector. Refer to Water Deflector Replacement - Sliding Door () .
4. Remove the door lock module. Refer to Lock Module Replacement - Sliding Door ()
5. Pry the barrel nut out of the lock assembly and push the lock rod away from the sliding door lock assembly.
6. Disconnect the sliding door lock module harness connector, if equipped.
