Terraza AWD V6-3.5L VIN L (2006)
1. Install the lock cylinder to the liftgate.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the liftgate lock cylinder retaining nuts.
Tighten the nuts to 10 N.m (89 lb in).
3. Attach the lock rod to the key cylinder.
4. Connect the electrical connector, if equipped.
5. Attach the lock rod to the latch.
6. Install the liftgate handle molding. Refer to Handle Replacement - Liftgate (See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate
Handle/Service and Repair) .
7. Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior
Trim Panel/Service and Repair) .
8. Close the liftgate.
