Terraza AWD V6-3.5L VIN L (2006)
Intake Manifold: Service and Repair
Intake Manifold Replacement - Upper
Intake Manifold Replacement - Upper
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the vacuum hoses from the following:
^
Evaporative emissions (EVAP) canister purge valve
^
Brake booster
3. Disconnect the electrical connectors from the following:
^
Exhaust gas recirculation (EGR) valve
^
Mass air flow (MAF) sensor
^
Electronic throttle control
^
EVAP canister purge valve
4. Remove the air cleaner intake duct.
5. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
6. Remove the left side spark plug wires from the spark plugs.
7. Remove the following wiring harnesses from the retainers:
^
Camshaft position (CMP) sensor wiring harness
^
Left side spark plug wire harness
^
Engine wiring harness
8. Remove the ignition coil bracket with the coils.
9. Remove the EVAP canister purge solenoid valve.
10. Remove the manifold absolute pressure (MAP) sensor and the bracket.
11. Remove the EGR valve.
