buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Refrigerant > < Receiver Dryer|Service and Repair
Page 2
background image

1. If replacing the receiver dehydrator, add the specified amount of PAG oil directly to the receiver dehydrator. Refer to Refrigerant System

Capacities.

2. Remove the cap or tape from the condenser lower openings.
3. Install NEW lower receiver dehydrator sealing washers.
4. Install the receiver dehydrator.
5. Install the receiver dehydrator lower bolts (3).

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 16 N.m (12 lb ft).

6. Install the receiver dehydrator upper bracket screw (4).

Tighten the bolt to 16 N.m (12 lb ft).

7. Remove the caps or tape from the open A/C lines.
8. Install the A/C condenser.

Refrigerant > < Receiver Dryer|Service and Repair