Terraza AWD V6-3.5L VIN L (2006)
19. Connect the vehicle harness connector (4) to the RR side impact module yellow connector (1).
20. Install the CPA to the RR side impact module connector (1).
21. Connect the vehicle harness connector (4) to the RF side impact module yellow connector (1).
22. Install the CPA to the RF side impact module connector (1).
23. Install the Air Bag Fuse.
24. Install the cover for the underhood fuse center.
25. Use caution while reaching in and turning the ignition switch to the ON position. The AIR BAG indicator will flash, then turn OFF.
26. Perform the Diagnostic System Check - Vehicle, if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System
Check - Vehicle. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures
