Terraza AWD V6-3.5L VIN L (2006)
EGR Valve: Service and Repair
EXHAUST GAS RECIRCULATION VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the air cleaner inlet duct.
2. Disconnect the electrical connector (1) from the exhaust gas recirculation (EGR) valve (2).
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the transaxle fill tube bolt to the transaxle case.
5. Remove the transaxle fill tube nut at the EGR valve and reposition the fill tube.
6. Lower the vehicle.
7. Remove the EGR pipe bolt and carefully pull the pipe assembly back.
8. Remove the EGR valve bolts.
9. Remove EGR valve.
10. Remove the EGR valve gasket.
11. Clean and inspect the EGR valve gasket mating surfaces.
INSTALLATION PROCEDURE