buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Auxiliary Power Outlet|Testing and Inspection > < Air Bag System Schematic Icons|Page 11129
Page 1
background image

Auxiliary Power Outlet: Description and Operation

POWER OUTLETS - DESCRIPTION AND OPERATION (120 AC VOLTS)

SYSTEM DESCRIPTION

The AC/DC power outlet system consists of the following components:
-

The AC/DC INV fuse

-

The AC/DC power outlet control module

-

The 120-volt power receptacle

SYSTEM OPERATION

The AC/DC power outlet control module converts the 12-volt DC input voltage to 120 AC volts at the 120-volt power receptacle. The AC/DC power
outlet control module provides 150 watts of power. The 120-volt power receptacle is located on the right rear interior trim panel. The AC/DC power
control module is located behind the right rear trim panel.

CIRCUIT OPERATION

Battery voltage is supplied to the AC/DC power outlet control module from the 25-amp AC/DC INV fuse located in the underhood fuse block. The
AC/DC power control module is grounded directly to the right rear D-pillar. When the ignition is turned ON, ignition voltage is supplied to the 
120-volt power receptacle using the ignition 3 voltage circuit. When a 120-volt AC powered device is plugged into the 120-volt power receptacle,
with the ignition ON, the normally open plug inserted switch, located internally in the 120-volt power receptacle, closes. The AC/DC power outlet
control module detects an ignition voltage signal on the 120 VAC Inverter control circuit and the AC/DC power outlet control module enables the 120
AC volts
 to the 120-volt power receptacle.

Auxiliary Power Outlet|Testing and Inspection > < Air Bag System Schematic Icons|Page 11129