Terraza AWD V6-3.5L VIN L (2006)
6. Remove the bolts (3), extension housing assembly (1), and shim (2) from the transfer case. Reference mark the shim for proper reassembly.
7. If reusing the drivenshaft bearings, measure in both directions, the rotating torque of the drivenshaft and record the value for assembly.
8. Notice:
Refer to Fastener Notice in Service Precautions.
Install the extension housing assembly (3) to the J 44755 (2) with M8 x 1.25 bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
