Terraza FWD V6-3.5L VIN 8 (2005)
Front Door Window Motor: Service and Repair
WINDOW REGULATOR MOTOR REPLACEMENT - FRONT DOOR
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the water deflector.
3. Disconnect the wiring harness connector from the regulator motor connector.
4. Gently flex the 3 motor retaining tabs to release the motor from the door module.
INSTALLATION PROCEDURE
1. Lubricate the motor drive gear teeth.
2. Position the power window module motor to the 3 window module retaining tabs. Press into place until fully seated.
IMPORTANT: The glass may need to be moved up or down in order to align the motor pinion teeth to the sector teeth.
3. Connect the wiring harness connector to the regulator motor connector.
4. Install the water deflector.
5. Install the trim panel.
