Terraza FWD V6-3.5L VIN 8 (2005)
5. With the aid of an assistant, remove the window (2) from the sliding door.
Installation Procedure
1. Install the stationary window (2) into the opening. Refer toUrethane Adhesive Installation of Bodyside Stationary Windows (See: Windows and
Glass/Windows/Service and Repair/Urethane Adhesive Installation of Bodyside Stationary Windows) .
2. Install the sliding door garnish molding. Refer toGarnish Molding Replacement - Sliding Door (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Garnish Molding Replacement - Sliding Door) in Doors.
3. Remove the double layer of masking tape around the perimeter of the painted surfaces (1).
4. Vent the front door windows until the sliding door window urethane has cured.
5. Install either the 40A, RH or LH power sliding door fuse to the I/P fuse block in order to enable the power to the power sliding door motor.
6. Perform the re-initialization procedure. Refer toAcutator Control Module - Power Sliding Door (PSD) Programming and Setup .
7. Close the sliding door.
