buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Bracket, Reinforcement, Side Trim Panel Replacement - Front Floor Console|Page 14476 > < Bracket, Reinforcement, Side Trim Panel Replacement - Front Floor Console|Page 14474
Page 2
background image

1. Position the overhead console in the vehicle.
2. Connect the electrical connectors.
3. Align the retainers to the openings in the vehicle.
4. Push the overhead console upward until the retainers engage securing the overhead console to the vehicle.

Notice:  Refer toFastener Notice    in Cautions and Notices.

5. Install the overhead console screw.

Tighten the screw to 2 Nm (18 lb in).

6. Install the courtesy lamp lens.

Bracket, Reinforcement, Side Trim Panel Replacement - Front Floor Console|Page 14476 > < Bracket, Reinforcement, Side Trim Panel Replacement - Front Floor Console|Page 14474