Terraza FWD V6-3.5L VIN 8 (2005)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Drip Rail
Weatherstrip Replacement - Drip Rail
Removal Procedure
1. Open the front door and the sliding side door.
2. Pull the front door roof drip rail weatherstrip (3) from the pinchweld flange.
3. Clean all of the adhesive from the pinchweld flange using 3M(TM) P/N 8984 adhesive remover or equivalent.
Installation Procedure
Important: A mastic/sealer/glue is inside of the new front door opening drip rail weatherstrip. If you are using a new front door opening
drip rail weatherstrip, DO NOT use any weatherstrip adhesive.
