Terraza FWD V6-3.5L VIN 8 (2005)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator and Tube Replacement
Removal Procedure
1. Remove the spark plug wire from the number 6 cylinder spark plug.
2. Remove the oil level indicator.
3. Remove the oil level indicator tube bracket bolt.
4. Remove the oil level indicator tube.
Installation Procedure
1. Clean the oil level indicator tube.
2. Apply sealant around the oil level indicator tube 12.7 mm (0.50 inch) below the bead. Use sealant GM P/N 12346286 (Canadian P/N 10953472)
or the equivalent.
3. Install the oil level indicator tube into the engine block.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the oil level indicator tube bracket bolt.
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
5. Install the oil level indicator.
6. Install the spark plug wire to the number 6 cylinder spark plug.
