Terraza FWD V6-3.5L VIN 8 (2005)
1. Install the exhaust manifold gasket.
2. Install the exhaust manifold.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the exhaust manifold nuts.
^
Tighten the exhaust manifold nuts to 16 Nm (12 ft. lbs.).
4. Install the exhaust manifold heat shield.
5. Install the exhaust manifold heat shield bolts.
^
Tighten the exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).
6. Install the exhaust crossover pipe.
7. Install the thermostat bypass pipe.
8. Connect the inlet radiator hose to the engine.
9. Install the right engine mount strut bracket.
10. Fill the cooling system with engine coolant.
11. Install the throttle body air inlet duct.
