buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Air Temperature Actuator (Single Zone)|Page 11910 > < Air Temperature Actuator (Single Zone)|Page 11908
Page 2
background image

1. Install the defrost actuator (3).
2. Install the defrost actuator bolts/screws (4).

Tighten the screws to 1.2 N.m (11 lb in).

NOTE:  Refer to Fastener Notice in Service Precautions.

3. Connect the defrost actuator electrical connector (2).
4. Install the driver side knee bolster. 
5. Re-calibrate the actuators. Refer to Re-Calibrating Actuators.

Air Temperature Actuator (Single Zone)|Page 11910 > < Air Temperature Actuator (Single Zone)|Page 11908