Terraza FWD V6-3.5L VIN 8 (2005)
Blower Motor Resistor: Service and Repair
Blower Motor Resistor Assembly
BLOWER MOTOR RESISTOR ASSEMBLY REPLACEMENT
REMOVAL PROCEDURE
1. Remove the blower motor.
2. Disconnect the electrical connector from the blower motor resistor.
3. Loosen the rearward blower motor resistor screws (3).
IMPORTANT: Loosen the rearward blower motor resistor screws. The rearward blower motor resistor holes are slotted.
4. Remove the forward blower motor resistor screw (3).
5. Remove the blower motor resistor (4).
INSTALLATION PROCEDURE
