Terraza FWD V6-3.5L VIN 8 (2005)
4. Install the left PSD module to the mounting bracket.
5. Connect the auxiliary temperature actuator electrical connector.
6. Connect the electrical connector to the auxiliary blower motor resistor.
7. Connect the auxiliary blower motor electrical connector.
8. Install the auxiliary A/C outlet duct (2).
9. Install the auxiliary A/C outlet duct bolts (1).
Tighten the bolts to 10 N.m (89 lb in).
10. Install the auxiliary A/C outlet pillar duct (2).
11. Install the auxiliary A/C outlet pillar duct bolts (1).
Tighten the bolts to 10 N.m (89 lb in).
12. Raise and suitably support the vehicle.
