Terraza FWD V6-3.5L VIN 8 (2005)
10. Install NEW sealing washers to the TXV end of the evaporator inlet/outlet tube.
11. Remove the caps or tape from the TXV openings.
12. Install the evaporator inlet/outlet tube block to the TXV.
13. Install the evaporator inlet/outlet tube block nut at the TXV.
Tighten the nut to 16 N.m (12 lb ft).
14. Install a NEW sealing washer (2) to the suction line.
15. Remove the cap or tape from the suction line opening.
16. Install the suction line to the evaporator outlet tube.
17. Install the suction line to evaporator outlet tube bolt (1).
Tighten the bolt to 16 N.m (12 lb ft).
18. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
19. Install the air cleaner assembly.
