Terraza FWD V6-3.5L VIN 8 (2005)
6. Lower the I/P electrical center bracket and swing the junction block into the stowage compartment area.
7. Squeeze and release the retaining tabs from the shroud/base in order to release the electrical connector from the I/P wiring harness.
8. Walk off the I/P accessory wiring junction block assembly from the connector.
9. Ensure the main harness is secured into the lower shroud/base.
IMPORTANT: Re-stage the connectors (2) into the lower I/P accessory wiring junction block assembly base/shroud (1) prior to installing the new
I/P wiring harness junction block.
INSTALLATION PROCEDURE
1. Verify that the harness connectors are securely locked to the retention tabs (3).
2. Position the connector (1) to the I/P wiring harness junction block.
