Terraza FWD V6-3.5L VIN 8 (2005)
1. Install the battery current sensor (2) by passing the ground end of the negative battery cable (1) through the sensor. Slide the current sensor to the
battery end of the cable in order to encompass all ground wires attached to battery.
2. Wrap electrical tape (3) around the battery current sensor (1) in order to secure the battery current sensor to the negative battery cable (4).
IMPORTANT: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable. Also ensure that ALL
grounding wires connected to negative post of battery pass through the sensor.
3. Install the battery negative cable to the vehicle.
4. Connect the battery current sensor electrical connector (2).
