Terraza FWD V6-3.5L VIN 8 (2005)
5. Remove the nuts and the bolts from the throttle body.
6. Remove the throttle body assembly.
7. Remove the throttle body gasket.
8. Clean and inspect the throttle body gasket mating surfaces.
NOTE: Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the
gasket surfaces and throttle body assembly may result.
Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.
INSTALLATION PROCEDURE
1. Install a new gasket, if necessary.
2. Install the throttle body assembly.
3. Install the throttle body nuts and the bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts and the bolts to 10 N.m (89 lb in).
